Oil and gas separation filter: oil and gas separation filter is a kind of gas oil separation to ensure the lubrication system of the device to work properly. Applications: petroleum, chemical, metallurgy, aviation, electronics, power, pharmaceutical, environmental, nuclear, nuclear industry, natural gas, refractories, fire setting and other areas of solid-liquid, gas-solid, gas-liquid separation and purification. Performance parameters: separated gas oil content: ≤ 3PPM w / w initial pressure: ≤ 0.02MPa replaceable pressure: 0.7MPa life: 3000 ~ 4500h works: from the compressor host head out of the air compressed folder with size does not an oil droplets, large droplets through the oil separator tank is easy to separate, and small oil droplets (in suspension) you must pass gas separation filter micron glass fiber filter for filtering. Select the correct diameter and thickness of glass fiber filtering effect is to ensure that an important factor. Oil mist filter through interception, diffusion and aggregation, the aggregation of small droplets quickly into large droplets in pneumatic and gravity through the filter layer, sedimentation in the filter at the bottom. The oil passes through the filter at the bottom of the recess of the return pipe imports constantly return lubrication system, so that the compressor discharge relatively pure, high quality compressed air. Replace the filter Note: When the pressure difference across the oil and gas separation filter should be replaced when reached 0.15MPa; when the pressure is zero, indicating that the filter is faulty or the airflow has short-circuited, this time also applied when to replace the filter. Normal replacement time from 3000 to 4000 hours, such as when their environment is poor use of time will be shortened. Return pipe installation, you must ensure that the tube is inserted into the bottom of the filter. Replace oil separator attention electrostatic discharge, take the metal casing Unicom network and drum up.